Building Pathology: Removal of Red Algae

I am writing this blog to highlight a recent aesthetic nuisance which turned out to be red algae and to show that every day can be a school day. It was an issue I had never had any previous experience with and therefore might shed some light for others that find themselves trying to resolve a similar issue.

Initial Survey

So, to give some background on this initial survey, I was called out to an estate after a tenant complaining of staining on their property. At first sight of the staining I presumed there was possibly a common brick underneath the render that was causing the issue or some sort of chemical reaction. The streaking pattern down the west facing gable walls made it look as if it was trapped moisture making its way through the render. There was no marks present on the north or south facing walls.


I checked a couple of my trusty defect books which had nothing which resembled the vivid red markings on the building I was faced with. I spoke to colleagues who mentioned that it was block work construction, so that blew my common brick staining theory out of the water.

I then decided to refer my problem to the internet and google the term ‘red staining on render’ and the image results pulled up a number of similar looking defects on buildings which was down to red algae. There is a company called Red Gable Cleaning who are based in Ireland, their Facebook page shows many examples of red algae.

What is Red Algae

Fabio Rindi and Michael D. Guiry (2002) have identified five species of the genera Trentepohlia, one of them being red algae. They noted that in western Ireland it is very common on concrete walls both bare and painted. It forms deep red patches with the appearance of irregular vertical stripes and can grow to cover many meters of wall surface. 

Red algae (Trentepohlia iolithus) can be found in cold and humid conditions, with its best conditions for growth based on laboratory tests were between 10 – 20 degrees. It is often found in Europe on rocks, walls and tree bark and as I found out the west of Scotland on rendered walls. Once you understand what it is it becomes very easily recognisable even from a distance as it is so distinctive.

A 2013 article from called the ‘Colonisation of surfaces’ stated the following “A biofilm forms when certain microorganisms adhere to the surface of some object in a moist environment and begin to reproduce. Biofilm formation on surfaces usually starts with phototrophic organisms (algae, cyanobacteria) which use carbon dioxide (CO2) from the atmosphere and sunlight as their carbon and energy source.”

Whilst the coating of an algae on the surface of a render does not look likely to cause any structural damage it does certainly spoil the appearance of surface and will lead to tenant complaints as I found out.

on close inspection you can see encrustations of yellow and green algae with the predominant red toned algae throughout.


Removal of Red Algae

As far as I can tell there are two main methods of removing and cleaning away red algae which are as follows:

  1. low pressure application of a specialist biocide
  2. low pressure high temperature steam

The Doff steam cleaning system is a specialist bit of kit which can be used for high temperature cleaning.  No harsh pressure or chemicals are used to clean the substrate when using this system and therefore is unlikely to cause damage. The steam will remove the algae and other biological matter whilst also killing off any spores. This means there’s then no need to use a chemical biocide during the removal process. The Doff steam cleaner is the only machine English Heritage approve for use on its buildings which is a good indication of its safety for use on heritage stock.

AlgoClear Pro Softclean is a product if you are looking for a biocide option. After application the red algae dies off very quickly but some discolouration can linger for a few days. Usually the self cleansing is complete within 10 days. Rinsing with fresh water at low pressure will complete the decontamination. The non-aggressive high purity biocide can be used with telescopic attachments so it could save money with scaffold / cherrypickers using this method.

After speaking to a building cleaning specialist I also learned that in addition to Doff, there is Thermatec, Torik and Karcher who also have machines that would be up to the task of effectively cleaning render. There are also other biocides available for example Benz biocidal wash. Ensuring the cleaning method adopted is suitable for the substrate is very important as using a high temperature steam cleaner on  resin or acrylic bonded render may damage the finish.


The issue of red algae is certainly more prevalent in western Ireland but is certainly an issue that can affect the west of Scotland as well. It is very easy to spot once you have a baseline understanding of what it is. It seems to be a fairly common issue with smooth pre-mixed silicone rendered finishes, to the point where one of the leading manufacturers, K Rend, has recommended AlgoClear as a way to remove algae.

There are various cleaning options available for this aesthetic nuisance which don’t have to break the bank and will keep tenants satisfied about the appearance of their properties.

As of the writing of this blog, a cleaning option has not been chosen for this particular job. I will update the blog with the effectiveness of the system that is used once the work has been completed.









%d bloggers like this:
search previous next tag category expand menu location phone mail time cart zoom edit close